The liquid metal wouldn’t be a problem if it were exclusively a horizontal console. They really only have an issue vertically because of gravity against the vertical socket. Many people leave their systems horizontal because that’s how it fits in their entertainment center best.
And I guess they usually fail after warranty expiration, so I guess there’s not really an incentive for Sony to care.
I’m surprised they haven’t just replaced it with something like graphite thermal pads at this point though just to remove the problem and to try and avoid class action lawsuits like the RROD issue ended up on the Xbox 360. Those can get pretty similar performance and don’t dry out or leak.
Yes, but most of them use thermal paste instead of liquid metal.
Realistically, thermal paste is good enough for pretty much every PC. You could see a benefit by using liquid metal in high-performance PCs that heat up a lot, and even then, it might not be worth it unless you’re overclocking. But if your PC needs it, you’ll need expert assistance
The liquid metal wouldn’t be a problem if it were exclusively a horizontal console. They really only have an issue vertically because of gravity against the vertical socket. Many people leave their systems horizontal because that’s how it fits in their entertainment center best.
And I guess they usually fail after warranty expiration, so I guess there’s not really an incentive for Sony to care.
I’m surprised they haven’t just replaced it with something like graphite thermal pads at this point though just to remove the problem and to try and avoid class action lawsuits like the RROD issue ended up on the Xbox 360. Those can get pretty similar performance and don’t dry out or leak.
Ummm…Arent most PC motherboards mounted vertically as well?
Yes, but most of them use thermal paste instead of liquid metal.
https://www.howtogeek.com/882856/liquid-metal-vs-thermal-paste/
I mean even liquid metal cooled setups.
You would have to dial back some clockspeeds even if you replaced it with PTM7950 and gimping the performance could also land them in legal hot water.
The ship of easy fixes has sailed when they decided to compensate for the smaller die by pushing it harder and thus needing better cooling.